China OEM oanpaste as standert roestfrij stiel camlock trochferlern wax ynvestearrings casting proses.
Stainless stiel hat in minimum chromium ynhâld fan 10,5%, wêrtroch it mear resistint foar corrosive floeibere omjouwings en oksidaasje. Dit is lykwols net absolút. Roestfrij stiel ynvestearringscastings binne "korrosjebestindich" as se brûkt wurde yn floeibere omjouwings en dampen ûnder 1200 ° F (650 ° C) en "hittebestindich" as brûkt boppe dizze temperatuer. AISI 316 is in austenitysk roestfrij stiel dat wurdt in soad brûkt foar ynvestearrings castings.
Mooglikheden fan Investment Casting Foundry:
• Max Grutte: 1.000 mm × 800 mm × 500 mm
• Weight Range: 0,5 kg - 100 kg
• Jierlikse Kapasiteit: 2.000 ton
• Bond Materialen foar Shell Building: Silica Sol, Water Glass en harren mingsels.
• Tolerânsjes: Op fersyk.
Foardielen fan Investment Casting Components:
- Excellent en glêd oerflak finish
- Tight dimensional tolerânsjes.
- Komplekse en yngewikkelde foarmen mei ûntwerpfleksibiliteit
- Mooglikheid om tinne muorren te smiten dus in lichtere casting komponint
- Brede seleksje fan getten metalen en alloys (ferro en non-ferro)
- Untwerp is net fereaske yn it ûntwerp fan mallen.
- Ferminderje de needsaak foar sekundêre ferwurkjen.
- Lege materiaal ôffal.
| Materialen foarInvestment CastingProses by RMC Foundry | |||
| Kategory | China Grade | US Grade | Dútslân Grade |
| Ferritysk roestfrij stiel | 1Cr17, 022Cr12, 10Cr17, | 430, 431, 446, CA-15, CA6N, CA6NM | 1.4000, 1.4005, 1.4008, 1.4016, GX22CrNi17, GX4CrNi13-4 |
| Martensitysk roestfrij stiel | 1Cr13, 2Cr13, 3Cr13, 4Cr13, | 410, 420, 430, 440B, 440C | 1.4021, 1.4027, 1.4028, 1.4057, 1.4059, 1.4104, 1.4112, 1.4116, 1.4120, 1.4122, 1.4125 |
| Austenitysk roestfrij stiel | 06Cr19Ni10, 022Cr19Ni10, 06Cr25Ni20, 022Cr17Ni12Mo2, 03Cr18Ni16Mo5 | 302, 303, 304, 304L, 316, 316L, 329, CF3, CF3M, CF8, CF8M, CN7M, CN3MN | 1.3960, 1.4301, 1.4305, 1.4306, 1.4308, 1.4313, 1.4321, 1.4401, 1.4403, 1.4404, 1.4405, 1.4404, 4.91, 4. 1.4435, 1.4436, 1.4539, 1.4550, 1.4552, 1.4581, 1.4582, 1.4584, |
| Precipitation Hardening Stainless Steel | 05Cr15Ni5Cu4Nb, 05Cr17Ni4Cu4Nb | 630, 634, 17-4PH, 15-5PH, CB7Cu-1 | 1.4542 |
| Duplex RVS | 022Cr22Ni5Mo3N, 022Cr25Ni6Mo2N | A 890 1C, A 890 1A, A 890 3A, A 890 4A, A 890 5A, A 995 1B, A 995 4A, A 995 5A, 2205, 2507 | 1.4460, 1.4462, 1.4468, 1.4469, 1.4517, 1.4770 |
| Hege Mn Steel | ZGMn13-1, ZGMn13-3, ZGMn13-5 | B2, B3, B4 | 1.3802, 1.3966, 1.3301, 1.3302 |
| Tool Steel | Cr12 | A5, H12, S5 | 1.2344, 1.3343, 1.4528, GXCrMo17, X210Cr13, GX162CrMoV12 |
| Heat Resistant Steel | 20Cr25Ni20, 16Cr23Ni13, 45Cr14Ni14W2Mo | 309, 310, CK20, CH20, HK30 | 1.4826, 1.4828, 1.4855, 1.4865 |
| Alloy op nikkelbasis | HASTELLY-C, HASTELLY-X, SUPPER22H, CW-2M, CW-6M, CW-12MW, CX-2MW, HX(66Ni-17Cr), MRE-2, NA-22H, NW-22, M30C, M-35 -1, INCOLOY600, INCOLOY625 | 2.4815, 2.4879, 2.4680 | |
| Aluminium Alloy | ZL101, ZL102, ZL104 | ASTM A356, ASTM A413, ASTM A360 | G-AlSi7Mg, G-Al12 |
| Koper Alloy | H96, H85, H65, HPb63-3, HPb59-1, QSn6.5-0.1, QSn7-0.2 | C21000, C23000, C27000, C34500, C37710, C86500, C87600, C87400, C87800, C52100, C51100 | CuZn5, CuZn15, CuZn35, CuZn36Pb3, CuZn40Pb2, CuSn10P1, CuSn5ZnPb, CuSn5Zn5Pb5 |
| Alloy op kobaltbasis | UMC50, 670, Grade 31 | 2.4778 | |
| INVESTERING CASTING TOLERANCES | |||
| Inches | Millimeters | ||
| Diminsje | Tolerânsje | Diminsje | Tolerânsje |
| Oant 0.500 | ±.004" | Oant 12.0 | ± 0.10 mm |
| 0.500 oant 1.000" | ±.006" | 12.0 oan 25.0 | ± 0.15 mm |
| 1.000 oant 1.500" | ±.008" | 25,0 oant 37,0 | ± 0.20 mm |
| 1.500 oant 2.000" | ±.010" | 37,0 oant 50,0 | ± 0.25 mm |
| 2.000 oant 2.500" | ±.012" | 50,0 oant 62,0 | ± 0.30 mm |
| 2.500 oant 3.500" | ±.014" | 62,0 oant 87,0 | ± 0.35 mm |
| 3.500 oant 5.000" | ±.017" | 87,0 oant 125,0 | ± 0.40 mm |
| 5.000 oant 7.500" | ±.020" | 125,0 oant 190,0 | ± 0,50 mm |
| 7.500 oant 10.000" | ±.022" | 190,0 oant 250,0 | ± 0.57 mm |
| 10.000 oant 12.500" | ±.025" | 250,0 oant 312,0 | ± 0.60 mm |
| 12.500 oan 15.000 | ±.028" | 312,0 oant 375,0 | ± 0,70 mm |
